|
|
THE DRIVE UNIT WEIGHS APPROXIMATELY 125 LBS.
IT IS EQUIPPED
WITH STANDARD 17 INCH LEGS ON THE MOTOR END,
A 1HP ELECTRIC MOTOR, A 30:1 GEAR REDUCER AND A VARIABLE
SPEED CONTROL
BOX WITH FORWARD AND REVERSE.
|
|
|
|
EACH ADD-ON SECTION IS MADE OF ALUMINUM AND STAINLESS STEEL, WEIGHS APPROXIMATELY 55 LBS. AND
IS 12½ FT. LONG X 1 FT. WIDE. THE SIDES ARE STAMPED WITH ''HAND-HOLDS'' FOR EASY CARRYING AND SET UP.
|
|
|
|
THE CIC Conveyor HAS A 500 LB. CONTINUOUS LOAD CAPACITY PER 75 FT. TRANSFER OF POWER IS ACCOMPLISHED
BY JOINING THE SECTIONS TOGETHER AND LOWERING THE LOCKING TABS. THE DRIVE SECTION MAY BE PLACED AT EITHER END OR IN THE
MIDDLE FOR A PUSH-PULL EFFECT.
|
|
|
|
THE CIC Conveyor WILL EASILY HANDLE INCLINES/DECLINES BECAUSE EACH SECTION WILL GO UP
OR DOWN 20 DEGREES. THIS MAKES IT THE PERFECT TOOL FOR LOADING AND UNLOADING TRUCKS.
|
|
|
|
THE CIC Conveyor CAN LAY FLAT ON THE GROUND OR A TABLE TOP. IT CAN BE USED WITH OPTIONAL
LEGS OR MONOPODS. WITH A GENERATOR, YOUR CIC Conveyor CAN BE USED ANYWHERE.
|
|
